Uncreative Labs

Posted: Mon Mar 02, 2009 4:32 am

I've got several keyboards that I don't really need, and would like to get rid of.

1 - XT compatible Zenith (84 key) - SOLD
3 - AT/XT switchable (101 key)
2 - PS/2

They're in various conditions, but mostly work. Only one keyboard is missing the escape key.

$1 per keyboard, plus shipping on the whole order.

Joined: 22 Apr 2007 Posts: 264 Location: Ohio/USA

Is the XT zenith working and intact?

Posted: Tue Mar 03, 2009 4:46 am

I myself would be interested in the switchable

Posted: Tue Mar 03, 2009 3:34 pm

Unknown_k, the Zenith is intact, but I cannot verify it works at this time. I had two Zenith keyboards, but I'm not sure if this one is the one that worked flawlessly, or if it's the one that had a few picky keys. Cosmetically, it's obvious it's been used, but all keys are there and all seem to work.

k2x4b52p, I'm testing one of the switchables right now. It seems to have randomly sticking keys (especially the left shift), or difficulty registering keypresses such as the comma. I'll have to try another one... This one might clear up after a deep cleaning.

Posted: Thu Mar 05, 2009 4:23 am

k2x4b52p,

Just checked the other switchables. They all exhibited the same shift key randomness behavior, so it might have been the PS/2 to USB keyboard adapter I'm using.

The first keyboard is an Acer KB-101A.

The second keyboard I tested had a little trouble with the "p" key, which cleared up after tapping it several times. It would occasionally miss keys when trying to touch type. It might clear up after use. The numpad enter key sticks, but it's always done that. (It hasn't been used for years. The switches probably just need to be used.) Texas Instruments model number KB-101A

The third keyboard is missing the escape key, and sends multiple keystrokes for presses of the keys g, t, h, y, backspace. Most likely a parts keyboard. (Great for wiring up a PANIC button, eh?) Key Tronic model E03435.

Posted: Thu Mar 05, 2009 5:07 am

the acer kb-101a would prolly work best then, i can fully disassemble it and clean it in great detail. I would like to know where you are located, i am in the seattle area and would be able to pay for shipping if needed

Posted: Thu Mar 05, 2009 8:37 am

I'm in central IL, 61571. If you'll send me your zipcode, I can get a shipping estimate for you. (A private message or email would be best.)

Posted: Sun Mar 22, 2009 6:58 am

*bump*

Puckdropper, haven't heard from you in a while. whats up?

Joined: 22 Apr 2007 Posts: 264 Location: Ohio/USA

I got my zenith, had to fix one key (dirty) but it works fine now. Has the same alps mechanism as my Northgate ones.

This summer I will try to unyellow it.

Posted: Sun Mar 22, 2009 9:15 pm

k2x4b524p,

Sorry about the delay. There were some message board problems that I had to fix first. I'll see about getting a shipping estimate for you.

Posted: Sun Mar 22, 2009 9:16 pm

Unknown_K,

That's good to hear. Smile

Good luck with the unyellowing.

Posted: Mon Mar 23, 2009 12:30 am

Puckdropper, that may not be necessary, i came across one at my local used parts store, i just need to see if it works, it looks like it's been beat up and not-cleaned for since it was new. I will let you know what happens